Special Offers

Product Compare (0)

Sort By

Show

E-SwitchON (6 On /Off +1 FAN Speed/Dimmer) Wifi Wireless Switch For Home Automation Android / Smartphone

Quick View

Days

Hours

Min

Sec

E-SwitchON (6 On /Off +1 FAN Speed/Dimmer) Wifi Wireless Switch For Home Automation Android / Smartphone

E-SwitchON Wifi (6 On /Off +1 FAN Speed/Dimmer) Wireless Switch For Home Automation Android / Smartphone, Smart Wifi Wireless Switch Features: 7 Device Control Output (6 On/Off + 1 FAN Speed/Dimmer Control 10 Level). Can be used directly to control 240V power appliances such as Lights, Fan, Projectors etc. Each Relay can switch ON or OFF individually Equipped with Six 7A / 250AC Relays Equipped with one 4A / 250AC Triac Relay contacts are brought out as Screw Terminals Indicates output status by LED Operates from 230V AC power supply Controllable WIFI Range of 100 feets (Open Field). This Board acts as a Wifi HotSpot. SPECIAL FEATURE - Memory backup, Saves the Last Condition of Relays so that when Power Fails and Resumes, all the settings will be retained. Power Indicator. Built-in Reset Button. Screw terminal to connect wires. Easy To Install. Board Dimension: 17.9 x 9.2 CM Applications: Switches lights, fans, la..

₹3,800.02 ₹2,203.05

Quick View

E-SwitchON 2 CH 30A Bluetooth / Wifi / Internet Wireless Switch For Home Automation Android / Smartphone

Quick View

Days

Hours

Min

Sec

E-SwitchON 2 CH 30A Bluetooth / Wifi / Internet Wireless Switch For Home Automation Android / Smartphone

E-SwitchON 2 CH 30A Bluetooth / Wifi / Internet Wireless Switch For Home Automation Android / Smartphone, Smart Wireless Switch Features: 2 Device Control Output. Can be used directly to control 240V power appliances such as Lights, Fan, Projectors, Air Conditioners etc. Each Relay can switch ON or OFF individually Equipped with Two 30A / 250V AC Relays Recommended Maximum load 16A / 250 V AC for Each Relay (Safety concern). Relay contacts are brought out as Screw Terminals Indicates output status by LED Operates from 230V AC power supply Controllable Bluetooth Range of 30 feets (Open Field). WIFI Range of 100 feets (Open Field). For Offline / Without Internet Control. This Board acts as Wifi Hotspot. Through INTERNET (from anywhere in the world), A Wifi Hotspot / Router with internet connection is required to control electrical devices from worldwide. SPECIAL FEATURE - Memory backup, Saves the Last Condition of Relays so that when Po..

₹4,433.62 ₹2,455.31

Quick View

E-SwitchON 2 CH 30A Bluetooth / Wifi Wireless Switch For Home Automation Android / Smartphone

Quick View

Days

Hours

Min

Sec

E-SwitchON 2 CH 30A Bluetooth / Wifi Wireless Switch For Home Automation Android / Smartphone

E-SwitchON 2 CH 30A Bluetooth / Wifi Wireless Switch For Home Automation Android / Smartphone, Smart Wireless Switch Features: 2 Device Control Output. Can be used directly to control 240V power appliances such as Lights, Fan, Projectors, Air Conditioners etc. Each Relay can switch ON or OFF individually Equipped with Two 30A / 250V AC Relays Recommended Maximum load 16A / 250 V AC for Each Relay (Safety concern). Relay contacts are brought out as Screw Terminals Indicates output status by LED Operates from 230V AC power supply Controllable Bluetooth Range of 30 feets (Open Field). WIFI Range of 100 feets (Open Field). This Board acts as Wifi Hotspot. SPECIAL FEATURE - Memory backup, Saves the Last Condition of Relays so that when Power Fails and Resumes, all the settings will be retained. Power Indicator. Built-in Reset Button. Screw terminal to connect wires. Easy To Install. Board Dimension: 13.2 x 9.2 CM Applications:..

₹4,275.22 ₹2,323.17

Quick View

E-SwitchON 2 CH 30A Bluetooth Wireless Switch For Home Automation Android / Smartphone

Quick View

Days

Hours

Min

Sec

E-SwitchON 2 CH 30A Bluetooth Wireless Switch For Home Automation Android / Smartphone

E-SwitchON 2 CH 30A Bluetooth Wireless Switch For Home Automation Android / Smartphone, Smart Bluetooth Wireless Switch Features: 2 Device Control Output. Can be used directly to control 240V power appliances such as Lights, Fan, Projectors, Air Conditioners etc. Each Relay can switch ON or OFF individually Equipped with Two 30A / 250V AC Relays Recommended Maximum load 16A / 250 V AC for Each Relay (Safety concern). Relay contacts are brought out as Screw Terminals Indicates output status by LED Operates from 230V AC power supply Controllable Bluetooth Range of 30 feets (Open Field). SPECIAL FEATURE - Memory backup, Saves the Last Condition of Relays so that when Power Fails and Resumes, all the settings will be retained. Power Indicator. Built-in Reset Button. Screw terminal to connect wires. Easy To Install. Board Dimension: 13.2 x 9.2 CM Applications: Switches lights, fans, laptop, desktop, Air conditioners etc.....

₹3,641.62 ₹1,794.63

Quick View

E-SwitchON 2 CH 30A Wifi / Internet Wireless Switch For Home Automation Android / Smartphone

Quick View

Days

Hours

Min

Sec

E-SwitchON 2 CH 30A Wifi / Internet Wireless Switch For Home Automation Android / Smartphone

E-SwitchON 2 CH 30A Wifi / Internet Wireless Switch For Home Automation Android / Smartphone, Smart Wireless Switch Features: 2 Device Control Output. Can be used directly to control 240V power appliances such as Lights, Fan, Projectors, Air Conditioners etc. Each Relay can switch ON or OFF individually Equipped with Two 30A / 250V AC Relays Recommended Maximum load 16A / 250 V AC for Each Relay (Safety concern). Relay contacts are brought out as Screw Terminals Indicates output status by LED Operates from 230V AC power supply WIFI Range of 100 feets (Open Field). For Offline / Without Internet Control. This Board acts as Wifi Hotspot. Through INTERNET (from anywhere in the world), A Wifi Hotspot / Router with internet connection is required to control electrical devices from worldwide. SPECIAL FEATURE - Memory backup, Saves the Last Condition of Relays so that when Power Fails and Resumes, all the settings will be retained. Power Indicator..

₹3,800.02 ₹2,058.90

Quick View

E-SwitchON 2 CH 30A Wifi Wireless Switch For Home Automation Android / Smartphone

Quick View

Days

Hours

Min

Sec

E-SwitchON 2 CH 30A Wifi Wireless Switch For Home Automation Android / Smartphone

E-SwitchON 2 CH 30A Wifi Wireless Switch For Home Automation Android / Smartphone, Smart Wireless Switch Features: 2 Device Control Output. Can be used directly to control 240V power appliances such as Lights, Fan, Projectors, Air Conditioners etc. Each Relay can switch ON or OFF individually Equipped with Two 30A / 250V AC Relays Recommended Maximum load 16A / 250 V AC for Each Relay (Safety concern). Relay contacts are brought out as Screw Terminals Indicates output status by LED Operates from 230V AC power supply Controllable WIFI Range of 100 feets (Open Field). This Board acts as a Wifi HotSpot. SPECIAL FEATURE - Memory backup, Saves the Last Condition of Relays so that when Power Fails and Resumes, all the settings will be retained. Power Indicator. Built-in Reset Button. Screw terminal to connect wires. Easy To Install. Board Dimension: 13.2 x 9.2 CM Applications: Switches lights, fans, laptop, desktop, Air condition..

₹3,641.62 ₹1,926.77

Quick View

Quick View

Days

Hours

Min

Sec

Edge Avoider Robot ( project kit )

Edge Avoider Robot (Project kit) Edge Avoider Robot is a ROBOT, which senses and avoids the absence of surface below it. This simple concept was designed by our researchers in order to help your robot to protect from falling. A robot that moves on an elevated surface by automatically detecting edges and avoiding the fall. This Robot is also called Edge Detector Robot. PACKAGE INCLUDES : 1) A ASSEMBLED Edge Avoider Robot (Project kit) Edge Avoider Robot (Project kit) IS ASSEMBLED OF FOLLOWING LISTED ITEMS: 1) TWO L TYPE BO DC MOTOR (+5V TO +12V) 2) 2 CLAMPS 3) 1 CASTOR WHEEL 4) TWO WHEELS 5) L293D BOARD (MOTOR DRIVER BOARD) 6) CHASSIS 7) IR SENSORS 8) 1 AVRDUINO/ARDUINO COMPATIBLE BOARD WITH AVR'S ATMEGA 8 IC 9) CONNECTING BURG WIRES 10) TUTORIAL GUIDE TEACHING HOW TO ASSEMBLE THE ROBOT FROM SCRATCH PARTS TO A Edge Avoider Robot (Project kit) 11) PRE BUILT AND BURNT Edge Avoider Robot (Project kit) IN ..

₹3,008.02 ₹1,848.69

Quick View

HC-SR04 Ultrasonic Module for ARDUINO, RASPBERRY PI, AVR, PIC, 8051

Quick View

Days

Hours

Min

Sec

HC-SR04 Ultrasonic Module for ARDUINO, RASPBERRY PI, AVR, PIC, 8051

Package Contents 1 x HC-SR04 Ultrasonic Module Product Details - Compatible with ARDUINO, RASPBERRY PI, AVR, PIC, 8051, etc. Working Voltage : 5V(DC) Static current: Less than 2mA. Output signal : Electric frequency signal, high level 5V, low level 0V. Sensor angle : Not more than 15 degrees. Detection distance : 2cm-450cm. High precision : Up to 2mm Input trigger signal : 10us TTL impulse Echo signal : output TTL PWL signal HC-SR04 ultrasonic module can offer non-contact distance sensing function, the range of which is 2cm to 400cm, and the range accuracy is up to 2mm. The module includes ultrasonic transmitter, receiver and control circuit. The basic operation principle is below : use IO port TRIG to trigger ranging. It needs 10 ..

₹521.14 ₹156.16

Quick View

Quick View

Days

Hours

Min

Sec

Hot Melt Glue Sticks (Set of 10)

Hot Melt Glue Sticks (Set of 10) Sticks are made from high quality raw material and can be used for various everyday gluing projects and applications. They are excellent for bonding heat sensitive material. These Glue sticks are Multi-Temperature and Multi-Purpose. The Glue sticks have a standard diameter and hence can be used in any standard size Glue Gun. This glue stick can be used with any Glue Gun. Excellent for bonding heat-sensitive materials, as well as general applications. APPLICATIONS - Gluing plastic, metal, wood, fabric, ceramics, and cartons.Multi-Temperature and Multi-Purpose Standard diameter for use in standard size Glue Guns. . Compatible with Stanley Glue Guns For use in glue guns. Color - Transparent. ..

₹473.62 ₹182.59

Quick View

IR 4 CH Remote Control Based Wireless Home Automation i.e. Lights / Fans On / Off Module

Quick View

Days

Hours

Min

Sec

IR 4 CH Remote Control Based Wireless Home Automation i.e. Lights / Fans On / Off Module

IR 4 Channel Remote Control Based Wireless Home Automation i.e. Lights / Fans On / Off Module IR Remote control is a combination of Infrared Transmitter and Receiver which contains 4 Relays which can be controlled wirelessly. This makes the unit very easy to operate and integrate with existing systems. The remote control operates the corresponding relay on the receiver board, i.e. (Light 1 operates relay 1), (Light 2 operates relay 2), etc. Relay contact can control any equipment in Latch Mode (Toggle on each key press). Each relay has indicator LED showing the ON/OFF status. The Transmitter uses a Modulated 38 KHz carrier to transmit data about which button is pressed. This method is used in all IR remote controls as it offers a high degree of noise immunity against interfering light sources. At the Receiver end, the IR receiver module extracts the data signal from the carrier. This active HIGH output is used to operate a relay via optocoupler. SPECIAL FEATURE - Memory backup E..

₹2,691.22 ₹975.40

Quick View

IR 5 CH (4 Lights +1 FAN Speed) Remote Control Based Wireless Home Automation

Quick View

Days

Hours

Min

Sec

IR 5 CH (4 Lights +1 FAN Speed) Remote Control Based Wireless Home Automation

IR 5 Channel (4 Lights +1 FAN Speed) Remote Control Based Wireless Home Automation IR Remote control is a combination of Infrared Transmitter and Receiver which contains 4 Relays and 1 TRiAC output which can be controlled wirelessly. This makes the unit very easy to operate and integrate with existing systems. The remote control operates the corresponding relay on the receiver board, i.e. (Light 1 operates relay 1), (Light 2 operates relay 2), etc. Relay contact can control any equipment in Latch Mode (Toggle on each key press). Each relay has indicator LED showing the ON/OFF status. The Transmitter uses a Modulated 38 KHz carrier to transmit data about which button is pressed. This method is used in all IR remote controls as it offers a high degree of noise immunity against interfering light sources. At the Receiver end, the IR receiver module extracts the data signal from the carrier. This active HIGH output is used to operate a relay via optocoupler. SPECIAL FEATURE - Memor..

₹2,691.22 ₹1,107.53

Quick View

IR 5 Channel (4 Lights +1 FAN Speed/Dimmer) Remote Control Based Wireless Home Automation

Quick View

Days

Hours

Min

Sec

IR 5 Channel (4 Lights +1 FAN Speed/Dimmer) Remote Control Based Wireless Home Automation

₹1,899.22 ₹843.26

Quick View

IR 5 Channel Remote Control Based Wireless Home Automation i.e. Lights / Fans On / Off Module

Quick View

Days

Hours

Min

Sec

IR 5 Channel Remote Control Based Wireless Home Automation i.e. Lights / Fans On / Off Module

IR 5 Channel Remote Control Based Wireless Home Automation i.e. Lights / Fans On / Off Module IR Remote control is a combination of Infrared Transmitter and Receiver which contains 4 Relays and 1 TRiAC output which can be controlled wirelessly. This makes the unit very easy to operate and integrate with existing systems. The remote control operates the corresponding relay on the receiver board, i.e. (Light 1 operates relay 1), (Light 2 operates relay 2), etc. Relay contact can control any equipment in Latch Mode (Toggle on each key press). Each relay has indicator LED showing the ON/OFF status. The Transmitter uses a Modulated 38 KHz carrier to transmit data about which button is pressed. This method is used in all IR remote controls as it offers a high degree of noise immunity against interfering light sources. At the Receiver end, the IR receiver module extracts the data signal from the carrier. This active HIGH output is used to operate a relay via optocoupler. SPECIAL FEATUR..

₹1,582.42 ₹719.54

Quick View

IR 7 CH (6 Lights +1 FAN Speed) Remote Control Based Wireless Home Automation

Quick View

Days

Hours

Min

Sec

IR 7 CH (6 Lights +1 FAN Speed) Remote Control Based Wireless Home Automation

IR 7 Channel (6 Lights +1 FAN Speed) Remote Control Based Wireless Home Automation IR Remote control is a combination of Infrared Transmitter and Receiver which contains 6 Relays and 1 TRiAC output which can be controlled wirelessly. This makes the unit very easy to operate and integrate with existing systems. The remote control operates the corresponding relay on the receiver board, i.e. (Light 1 operates relay 1), (Light 2 operates relay 2), etc. Relay contact can control any equipment in Latch Mode (Toggle on each key press). Each relay has indicator LED showing the ON/OFF status. The Transmitter uses a Modulated 38 KHz carrier to transmit data about which button is pressed. This method is used in all IR remote controls as it offers a high degree of noise immunity against interfering light sources. At the Receiver end, the IR receiver module extracts the data signal from the carrier. This active HIGH output is used to operate a relay via optocoupler. SPECIAL FEATURE - Memor..

₹3,298.90 ₹1,428.90

Quick View

IR 9 (4+1+4) Ch Remote Control Based Wireless Home Automation i.e. Lights / Fans On / Off Module

Quick View

Days

Hours

Min

Sec

IR 9 (4+1+4) Ch Remote Control Based Wireless Home Automation i.e. Lights / Fans On / Off Module

IR 9 (4+1+ 4 Extension) Channel Remote Control Based Wireless Home Automation i.e. Lights / Fans On / Off Module IR Remote control is a combination of Infrared Transmitter and Receiver which contains 4 Relays and 1 TRiAC output which can be controlled wirelessly. This makes the unit very easy to operate and integrate with existing systems. The remote control operates the corresponding relay on the receiver board, i.e. (Light 1 operates relay 1), (Light 2 operates relay 2), etc. Relay contact can control any equipment in Latch Mode (Toggle on each key press). Each relay has indicator LED showing the ON/OFF status. The Transmitter uses a Modulated 38 KHz carrier to transmit data about which button is pressed. This method is used in all IR remote controls as it offers a high degree of noise immunity against interfering light sources. At the Receiver end, the IR receiver module extracts the data signal from the carrier. This active HIGH output is used to operate a relay via optocoupler..

₹2,482.42 ₹1,219.54

Quick View

L293D Motor Drive Shield for Arduino Uno

Quick View

Days

Hours

Min

Sec

L293D Motor Drive Shield for Arduino Uno

L293D Motor Drive Shield for Arduino Uno Can drive 4 dc motors or 2 stepper motors or 2 servo Up to 4 bi-directional dc motors with individual 8-bit speed selection Up to 2 stepper motors (unipolar or bipolar) with single coil, double coil or interleaved stepping 4 h-bridges: Per bridge provides 0.6a (1.2a peak current) with thermal protection, can run motors on 4.5v to 36v dc 2 external terminal power interface, for seperate logic/motor supplies Tested compatible for arduino uno mega, diecimila and duemilanove. ..

₹790.42 ₹288.29

Quick View

Light Avoiding Robot ( Project kit ) (FULLY ASSEMBLED)

Quick View

Days

Hours

Min

Sec

Light Avoiding Robot ( Project kit ) (FULLY ASSEMBLED)

Light Avoiding Robot (Project kit) Robot senses the light and directed away from the high luminance area i.e. runs away from light. PACKAGE INCLUDES : 1) A ASSEMBLED Light Avoiding Robot (Project kit) Light Avoiding Robot (Project kit) IS ASSEMBLED OF FOLLOWING LISTED ITEMS: 1) TWO L TYPE BO DC MOTOR (+5V TO +12V) 2) 2 CLAMPS 3) 1 CASTOR WHEEL 4) TWO WHEELS 5) L293D BOARD (MOTOR DRIVER BOARD) 6) CHASSIS 7) LIGHT SENSORS 8) 1 AVRDUINO/ARDUINO COMPATIBLE BOARD WITH AVR'S ATMEGA 8 IC 9) CONNECTING BURG WIRES 10) TUTORIAL GUIDE TEACHING HOW TO ASSEMBLE THE ROBOT FROM SCRATCH PARTS TO A Light Avoiding Robot (Project kit) 11) PRE BUILT AND BURNT Light Avoiding Robot (Project kit) IN AVRDUINO ATMEGA 8 IC Points to be noted: 1) This Light Avoiding Robot (Project kit) is ASSEMBLED BY PRE-FABRICATED PARTS. 2) CHASSIS of the ROBOT is made of PLY BOARD. 3) PROGRAM CODE or HEX FILE or mobile shown WONT BE PROVIDED. 4) Power ..

₹3,852.82 ₹2,182.96

Quick View

Light Seeking Robot ( Project kit ) (FULLY ASSEMBLED)

Quick View

Days

Hours

Min

Sec

Light Seeking Robot ( Project kit ) (FULLY ASSEMBLED)

Light Seeking Robot (Project kit) Robot senses the light and directed to the high luminance area i.e. towards light. PACKAGE INCLUDES : 1) A ASSEMBLED Light Seeking Robot (Project kit) Light Seeking Robot (Project kit) IS ASSEMBLED OF FOLLOWING LISTED ITEMS: 1) TWO L TYPE BO DC MOTOR (+5V TO +12V) 2) 2 CLAMPS 3) 1 CASTOR WHEEL 4) TWO WHEELS 5) L293D BOARD (MOTOR DRIVER BOARD) 6) CHASSIS 7) LIGHT SENSORS 8) 1 AVRDUINO/ARDUINO COMPATIBLE BOARD WITH AVR'S ATMEGA 8 IC 9) CONNECTING BURG WIRES 10) TUTORIAL GUIDE TEACHING HOW TO ASSEMBLE THE ROBOT FROM SCRATCH PARTS TO A Light Seeking Robot (Project kit) 11) PRE BUILT AND BURNT Light Seeking Robot (Project kit) IN AVRDUINO ATMEGA 8 IC Points to be noted: 1) This Light Seeking Robot (Project kit) is ASSEMBLED BY PRE-FABRICATED PARTS. 2) CHASSIS of the ROBOT is made of PLY BOARD. 3) PROGRAM CODE or HEX FILE or mobile shown WONT BE PROVIDED. 4) Power Supply for Robot : P..

₹3,852.82 ₹2,182.96

Quick View

Line Following Robot Using Microcontroller - DIY ( Do It Yourself ) PROJECT Kit (FULLY ASSEMBLED)

Quick View

Days

Hours

Min

Sec

Line Following Robot Using Microcontroller - DIY ( Do It Yourself ) PROJECT Kit (FULLY ASSEMBLED)

Line Follower Robot (DO IT YOURSELF KIT) Line follower is an autonomous robot which follows either black line in white arena or white line in black arena. Robot must be able to detect particular line and keep following it. For special situations such as cross overs where robot can have more than one path which can be followed, predefined path must be followed by the robot. OUR LINE FOLLOWER FOLLOWS SIMPLE BLACK LINE. PACKAGE INCLUDES : 1) A ASSEMBLED LINE FOLLOWER ROBOT 2) FREE ACCESSORIES LINE FOLLOWER ROBOT IS ASSEMBLED OF FOLLOWING LISTED ITEMS: 1) TWO L TYPE BO DC MOTOR (+5V TO +12V) 2) 2 CLAMPS 3) 1 CASTOR WHEEL 4) TWO WHEELS 5) L293D BOARD (MOTOR DRIVER BOARD) 6) CHASSIS 7) TWO IR (INFRARED SENSORS) 8) 1 AVRDUINO/ARDUINO COMPATIBLE BOARD WITH AVR'S ATMEGA 8 IC 9) CONNECTING BURG WIRES 10) TUTORIAL GUIDE TEACHING HOW TO ASSEMBLE THE ROBOT FROM SCRATCH PARTS TO A LINE FOLLOWER ROBOT. 11) PRE BUILT AND BURNT LINE FOLLOWER PROGRAM IN AVRDUINO ATMEGA..

₹3,852.82 ₹2,182.96

Quick View

Days

Hours

Min

Sec

Line Following Robot Using Microcontroller - DIY ( Do It Yourself ) PROJECT Kit (FULLY ASSEMBLED)

₹4,856.02 ₹2,182.96

Quick View

Showing 61 to 80 of 129 (7 Pages)

Categories

HC-SR04 Ultrasonic Module for ARDUINO, RASPBERRY PI, AVR, PIC, 8051

Modulated 38Khz IR Sensor for Obstacle Line Arduino Rasp Pi 8051 AVR

NEW DC MOTOR / STEPPER MOTOR DRIVER BOARD MODULE with L293D IC for ARM ARDUINO AVR PIC 8051

Nipper-07 Copper And Aluminium Wire Cutter

E-SwitchON (6 On /Off +1 FAN Speed/Dimmer) Wifi Wireless Switch For Home Automation Android / Smartphone

E-SwitchON 2 CH 30A Bluetooth / Wifi / Internet Wireless Switch For Home Automation Android / Smartphone

E-SwitchON 2 CH 30A Bluetooth / Wifi Wireless Switch For Home Automation Android / Smartphone

E-SwitchON 2 CH 30A Bluetooth Wireless Switch For Home Automation Android / Smartphone

E-SwitchON 2 CH 30A Wifi / Internet Wireless Switch For Home Automation Android / Smartphone

E-SwitchON 2 CH 30A Wifi Wireless Switch For Home Automation Android / Smartphone

Edge Avoider Robot ( project kit )

HC-SR04 Ultrasonic Module for ARDUINO, RASPBERRY PI, AVR, PIC, 8051

Hot Melt Glue Sticks (Set of 10)

IR 4 CH Remote Control Based Wireless Home Automation i.e. Lights / Fans On / Off Module

IR 5 CH (4 Lights +1 FAN Speed) Remote Control Based Wireless Home Automation

IR 5 Channel (4 Lights +1 FAN Speed/Dimmer) Remote Control Based Wireless Home Automation

IR 5 Channel Remote Control Based Wireless Home Automation i.e. Lights / Fans On / Off Module

IR 7 CH (6 Lights +1 FAN Speed) Remote Control Based Wireless Home Automation

IR 9 (4+1+4) Ch Remote Control Based Wireless Home Automation i.e. Lights / Fans On / Off Module

L293D Motor Drive Shield for Arduino Uno

Light Avoiding Robot ( Project kit ) (FULLY ASSEMBLED)

Light Seeking Robot ( Project kit ) (FULLY ASSEMBLED)

Line Following Robot Using Microcontroller - DIY ( Do It Yourself ) PROJECT Kit (FULLY ASSEMBLED)

Line Following Robot Using Microcontroller - DIY ( Do It Yourself ) PROJECT Kit (FULLY ASSEMBLED)

CART

Special Offers